Figure 4a Color Shifts for the DCI-P3 Gamut
Figure 4b Color Shifts for the sRGB / Rec.709 Gamut
The Colors and Absolute Color Accuracy of the display should not vary as the on-screen image content changes. In Figure 4 below we examine and measure the Shifts in Color with changing image content from Low Average Picture Level APL to 50% Average Picture Level APL.
Figures 4a-b show the variation in the Absolute Color Accuracy between Low APL and 50% APL for the DCI-P3 and sRGB / Rec.709 Gamuts. The Color Shifts with APL are very small, with Average Shifts of just 0.3 JNCD and the Largest Color Shifts of just 0.8-0.9 JNCD for the Gamuts. The White Point Color Shifts with APL for both Gamuts are very small at 0.3 JNCD.
Color Shifts with APL
section of the main article for the measurements and details.
The Color Shifts are very small so the Low APL Red data points are almost entirely covered over by the 50% APL Blue data points.
The Average Color Shift from Low APL to 50% APL is 0.3 JNCD and the Largest is 0.9 JNCD